Case study Analisis Example | Topics and Well Written Essays - 750 words

Analisis - Case Study ExampleAnother probable cause is the experient age of the aircraft. This finical aircraft was nineteen years old and had operated for 35,496 hours (Aubury, 2012). As such, its frames, joints, and skin could have been stretched as the fuselage had been pumped up the upper limit level of pressure (Hawaiian Steam Engineering, 1997).The probable main cause of the accident, as determined by the NTSB, points to the circumstance the accident happened majorly due to structural and robotlikely skillful factors. The failure of the lap joint S-1OL and the fuselage of the upper lobe are either mechanical factors however, there are contributing factors like which could cause the accident (Aviation Safety Network, 2012). These structural and mechanical factors were widely attributed to the failure to conduct continuous and substantive mechanism and inspection on the aircraft by the aloha Airlines. This structural and mechanical condition was also attributed to corrosion, since the aircraft was to operate in a coastal environment and was, therefore, open(a) to humidity and salt. Its old age is another reason for the mechanical breakdown that led to the accident (MacPherson, 1998).In addition, complacency on the part of Boeing about fuselage led to the mechanical failure. While Boeing was concerned about its old aircraft, its engineers had a naive faith that if a fuselage cracked anywhere, a lead crack would grow along the skin until it reaches the frame of the fuselage, then turn at right angles and a triangular shaped bill would eventually blow out and dump fuselage pressure safely (Hawaiian Steam Engineering, 1997). Because of this complacency, the most of the structural and mechanical aspects regarding the fuselage were ignored and this ultimately led to the accident. The Aloha Airlines also seemed to have ignored too many sentry duty recommendations from the